Traditional New England Bass Boat
Seaway 24 Seafarer
Seaway’s 24 Seafarer follows the traditional look of the New England “bass boat” with a cuddy cabin, large protective windshield and a canvas “Navy top” all built on a seaworthy, efficient workboat hull with a proud bow, low sides aft and a self-bailing cockpit. The bass boats were originally built for guides carrying anglers to fish the legendary tide rips around Martha’s Vineyard, Nantucket, and Cuttyhunk, but people soon realized how useful their layout is for day-cruising and overnights. The 24 Seafarer performs well too, with an efficient but powerful 150-hp outboard, offering easy cruising speeds of 18-25 mph with a top speed in the low 30's.
Specification highlights
-
24 FT
Length
-
14 IN
Draft
-
3950LB
Dry Weight
Versatile And Able Package
This bass boat can fish if asked, with under-gunwale rod holders standard and gunwale-mounted vertical holders optional. Another virtue of the 24 Seafarer is trailerability. Her 8’6” beam fits the regulations for all states, without necessitating wide-load permits. Thus if there’s a tidal river/sound system that begs for exploring, just hitch up, pull her out, and go.
Recommended Power:
Single 150 hp Outboard
Key Features
- L-Shaped Lounge
- Cuddy Cabin
- Self-Bailing Cockpit
- Freshwater System
- Versatile Design
- Loads Of Options
Explore
Some configurations, options, accessories, and/or colors may not be shown. Confirm availability of all accessories, options and equipment with our sales team.
Equipment List
- Hand Laid Fiberglass Hull
- Self Bailing Cockpit w/ Scuppers
- One Piece Stringer Grip w/ Foam Floatation
- Composite Fixed Windshield
- SS Bow Rail
- SS Coaming Board Caps
- Black Rub Rail
- Spray Rails (Black or White)
- Quarter Guards (Black or White)
- Composite Trim & Handrails
- Inspection Deck Plates
- SS Pop Up Rear Cleats
- 10" Fixed SS Bow Cleats
- SS Bow Chocks
- SS Bow Eye
- SS Rod Holders (Pair)
- Anchor Roller & Deck Pipe
- Hinged Helm
- Boot Stripe
- Color Matched Cove Stripe
- Synthetic Marine Foam Flooring
- Standard Hull & Deck Colors (White or Black)
- Bi-Fold Cabin Door
- Marine Head w/ Holding Tank & Pumpout
- 19 x 19 Cabin Hatch w/ Screen
- Opening Cabin Ports w/ Screen (4)
- Teak Interior Trim
- 64 Gallon Fuel Tank
- 13 Gallon Fresh Water Tank
- Water Separating Fuel Filter
- 12v LED Navigation Lights
- 6 Gang Electrical Switch Panel
- 12v/USB Accessory Plug
- V-Berth LED Dome Light (White)
- Compass
- Classic Analog Fuel Gauge
- Hydraulic Steering
- Electric Bilge Pump & Auto Float
- Dual Batteries & Switch
- Electric Horn
- Upholstered Helm Seat
- L-Shaped Lounge Seating w/ Sink
- V-Berth Seating w/ Cushions
- Sunbrella Upholstery
- Dark Hull Color Upgrade
- Pastel Hull Color Upgrade
- Anti Fouling Bottom Paint
- Outboard Full Width Engine Bracket
- Color Matched Full Width Swim Platform
- Bow Thruster
- 3 Step Bracket Mounted Ladder
- Transom Mounted Boarding Ladder
- SS Bow Rail
- Oiled Teak Package
- Varnished Teak Package (Gloss Finish)
- Dockside Pumpout
- Raw Water Washdown
- Spray Rails Color Matched to Hull
- Additional SS Rod Holders (Pair)
- Shore Power w/ Battery Charger
- Anchor Windlass W/ 15' Chain & 200' Rode
- Trim Tabs
- Dual Batteries w/ Switch
- 12v/110v Refrigerator
- Additional 6 Gang Switch Panel
- Additional 12v/USB Accessory Plug
- Windshield Wiper (Each)
- Macerating Overboard Discharge
- Rear Box Seat w/ Backrest & Cushions
- Cockpit Table
- V-Berth Filler w/ Cushions
- Offshore Hardtop Package
- Bimini Top w/ Boot
- Side & Aft Curtains
- NMEA 2000 Connectivity
- Electronics Packages
- Stereo Packages
- Load Rite Trailer Option
Tour Our Factory
Factory Direct Sales & Experience
We engineer and build boats that will give you many years of boating enjoyment. Contact us about getting a tour of our facility. You can also take delivery of your boat right at our factory in Milton, NH.